Description
H@me allows you to control your HAI Omni or Lumina home automation system from your iPhone or iPod Touch. Adjust your lights, thermostats, music, webcams, security and more from anywhere, anytime with H@me.
You may wish to try H@me 2.0 Lite first, a free version of H@me 2.0 that will validate your connection settings and list the status of all available devices on your system. If H@me 2.0 Lite can connect to your system then the full version of H@me 2.0 will work as well.
**H@me 2.0 requires that your HAI system have firmware 3.0 or later**
Features include:
*Lighting
Control and view your lighting, drapes, flags and other units. H@me supports HLC rooms, scene selection, dimming and more.
*Thermostats, Temperatures and Humidity
View your thermostats, temperature and humidity sensors. H@me can remotely set your heat and cool thresholds, fan modes, hold status and more.
*Security
H@me can arm and disarm your security system, check zone statuses and bypass or restore a zone.
*Music
With a connected audio system, H@me can display channel and song information as well as provide basic track and volume control. H@me is compatible with Russound, HAI HiFi, Xantech, NuVo and Speakercraft systems.
*Cameras
View multiple webcams in real-time. H@me can stream from any standard IP enabled webcam that supports JPEG output.
*Events
Display your system events such as alarm, arm/disarm and trouble messages.
*Buttons
Execute your programed buttons/macros.
*Multiple system/controller support
*Real time updating of devices
**** Whats New in 2.0 ****
*System Requirements
H@me version 2.0 requires your HAI system to have firmware 3.0 or later. Users with firmware 2.16 and earlier will need to purchase and install an inexpensive upgrade chip.
*Lighting
Automatic detection of rooms, lights and flags
Room dimming
Scene selection
Flag/Counter control
*Thermostats, Temperatures and Humidity
Indoor/outdoor temperature sensors
Humidity sensors
Hold mode
Automatic display of Celsius or Fahrenheit
*Security
Better zone display and management
Bypass/Restore
Access code prompt
*Music
HAI HiFi, Xantech, Nuvo and Speakercraft support
*Cameras
Time and date display
Single camera mode
*Events
Display the system event log
*General
Large amount of bug fixes
Improved stability
Improved networking using HAI's TCP based protocol
General UI improvements and clean up
Update notification option
You may wish to try H@me 2.0 Lite first, a free version of H@me 2.0 that will validate your connection settings and list the status of all available devices on your system. If H@me 2.0 Lite can connect to your system then the full version of H@me 2.0 will work as well.
**H@me 2.0 requires that your HAI system have firmware 3.0 or later**
Features include:
*Lighting
Control and view your lighting, drapes, flags and other units. H@me supports HLC rooms, scene selection, dimming and more.
*Thermostats, Temperatures and Humidity
View your thermostats, temperature and humidity sensors. H@me can remotely set your heat and cool thresholds, fan modes, hold status and more.
*Security
H@me can arm and disarm your security system, check zone statuses and bypass or restore a zone.
*Music
With a connected audio system, H@me can display channel and song information as well as provide basic track and volume control. H@me is compatible with Russound, HAI HiFi, Xantech, NuVo and Speakercraft systems.
*Cameras
View multiple webcams in real-time. H@me can stream from any standard IP enabled webcam that supports JPEG output.
*Events
Display your system events such as alarm, arm/disarm and trouble messages.
*Buttons
Execute your programed buttons/macros.
*Multiple system/controller support
*Real time updating of devices
**** Whats New in 2.0 ****
*System Requirements
H@me version 2.0 requires your HAI system to have firmware 3.0 or later. Users with firmware 2.16 and earlier will need to purchase and install an inexpensive upgrade chip.
*Lighting
Automatic detection of rooms, lights and flags
Room dimming
Scene selection
Flag/Counter control
*Thermostats, Temperatures and Humidity
Indoor/outdoor temperature sensors
Humidity sensors
Hold mode
Automatic display of Celsius or Fahrenheit
*Security
Better zone display and management
Bypass/Restore
Access code prompt
*Music
HAI HiFi, Xantech, Nuvo and Speakercraft support
*Cameras
Time and date display
Single camera mode
*Events
Display the system event log
*General
Large amount of bug fixes
Improved stability
Improved networking using HAI's TCP based protocol
General UI improvements and clean up
Update notification option
What's new in Version 2.0.16
*Fixes multiple system bug.
New In 2.0.14
* Real time updating of devices!
* Lights, thermostats, zones and more will update their statuses in real time.
* New UI interface will display realtime updates as they are happening
* Added additional controls to Russound and Nuvo connected audio systems.
* Security zones now prompt for a pass-code to arm, disarm or bypass.
* Improved multiple area support.
* Various UI, performance and stability improvements.
New In 2.0.14
* Real time updating of devices!
* Lights, thermostats, zones and more will update their statuses in real time.
* New UI interface will display realtime updates as they are happening
* Added additional controls to Russound and Nuvo connected audio systems.
* Security zones now prompt for a pass-code to arm, disarm or bypass.
* Improved multiple area support.
* Various UI, performance and stability improvements.
iPA size 0.9 MB
LANGUAGES: English
REQUIREMENTS: Compatible with iPhone, iPod touch, and iPad. Requires iOS 3.0 or later
Download HERE
No comments:
Post a Comment